Dealing with a slow drain or a sudden burst pipe? Converse and the surrounding Bexar County area rely on this plumbing contractor for residential and commercial work alike. From routine repairs and fixture installations to urgent calls that cannot wait, we handle the full range. Same-day appointments are often available, and we are open every day from 8:00 AM to 9:00 PM. Whether you are a homeowner dealing with a backed-up drain or a property manager who needs a unit turned around fast, we are a local plumber for homeowners and commercial clients who want the job done right. Call (830) 590-5192 for a plumbing quote. Call today. Fixed tomorrow. Flowing for good.
For residential and commercial plumbing work alike, we operate as a full-service plumbing contractor ready for any job size. Everyday drain cleaning and clog removal, leak detection and repair, toilet repair and replacement, faucet and fixture installation, garbage disposal installation and repair, shutoff valve replacement, and water pressure diagnostics are all part of what we do on a regular basis.
Older homes in Converse sometimes reach a point where repairs pile up because the pipes themselves are the problem. Whole-home repiping is an option worth considering when a house has aging galvanized or polybutylene lines that keep failing. We walk through what is involved, what it costs, and whether it makes sense before anything is scheduled.
Property managers, landlords, and apartment owners get the same direct service as any homeowner. A leaking unit or a clogged line in a rental property needs a fast answer, and we provide straight answers about your pipes and fixtures so you can make a decision and move on. Give us a call and we will take it from there.
Before a small leak turns into water damage, it pays to have a number you can call without hesitation. A burst pipe, a sewage backup, a sudden loss of water pressure, or no hot water at all are not situations where waiting until Monday makes sense. These are the calls we take seriously every day of the week.
We are open from 8:00 AM to 9:00 PM every day, and same-day service is often available for urgent plumbing problems. Emergency water heater repair and emergency drain cleaning are two of the most common calls we handle on short notice. A pipe that lets go inside a wall or a main line that backs up into the house needs attention now, not a scheduled appointment three days out.
When you call, you get a straight answer about what comes next and what it will cost. One call brings a plumber to your door.
A water heater that stops working, leaks from the base, or delivers lukewarm water at best is a problem that affects the whole house. We repair and replace both tank and tankless water heaters, and the work is performed by licensed plumbers who diagnose the issue before recommending anything.
A visit starts with a look at the unit, a clear explanation of what is wrong, and a confirmed rate before any work is scheduled. If a repair makes sense, we do the repair. If the unit has reached the end of its useful life, we walk through replacement options that fit the space and the household's demand. Tankless water heater installation is an option for homeowners who want on-demand hot water and a smaller footprint in the utility room.
No pressure and no gimmicks, just sound, lasting plumbing. We'll make your plumbing sound again.
For residential and commercial plumbing work alike, sewer and main line problems are some of the most disruptive a property owner can face. A slow drain in one fixture might be a simple clog. When multiple drains back up at once, or when sewage is coming up through a floor drain, the main line is usually the source.
We handle main line cleaning, sewer line repair and replacement, and sewage backup response. For stubborn blockages that standard snaking cannot clear, hydro jetting uses high-pressure water to cut through grease, scale, and debris without damaging the line. Where a section of sewer line has collapsed or corroded, trenchless repair methods can often address the problem with far less digging than a traditional open-cut approach.
We speak only to the line from the house to the connection point. What happens beyond that is a separate trade, and we stay on our side of it.
Converse and the wider Bexar County area sit in a region shaped by clay-heavy soil, seasonal storms that can deliver heavy rain in a short window, and a water supply drawn from sources known for elevated mineral content. Those conditions show up in the plumbing calls we handle most often here.
Low-lying areas in and around Converse can collect water quickly when a storm moves through. Clay soil does not drain fast, and that means water can pool against a foundation or push into a crawl space before it has anywhere to go. A sump pump installed in the right location moves that water out before it causes damage. We handle new installations, repairs to existing pumps, and full replacements when a unit has failed or is no longer keeping up. A visit covers the pump itself, the discharge line, and a check of the system to confirm it will run when it is needed.
Established neighborhoods in Converse have mature trees, and mature trees have root systems that follow moisture straight into sewer lines. Clay pipe and older cast-iron line are especially vulnerable because root intrusion starts at joints and cracks that already exist. Once roots get inside, they grow and eventually block the line entirely. We clear root intrusion, inspect the affected section, and repair or replace the line where the damage warrants it. Catching this early saves a much larger repair later.
The Hill Country and greater San Antonio region, including Converse, draws from a water supply with high mineral content. Hard water leaves scale inside pipes, on fixture surfaces, and inside water heaters, where buildup shortens the life of the tank and the heating element. A water softener connected properly to the plumbing system reduces that scale load across the whole house. We install softeners and tie them into the existing supply line so the treated water reaches every fixture. A visit covers the unit, the connection, and a walkthrough of how the system works.
What sets this plumbing service apart is straightforward: we show up ready to do the work, not just assess it. Faucet and sink repair and installation, toilet installation, shower and bathtub work, outdoor faucets, and hose bib repair are all part of what we handle for homeowners and property managers on a regular basis.
A kitchen or bathroom remodel always reaches a point where the plumbing needs to move or a new fixture needs to be set correctly. We work alongside renovation projects to rough in supply and drain lines, set fixtures, and make sure everything is connected and tested before the walls go up. Property managers upgrading units between tenants get the same focused service. We are a straightforward choice for homeowners and property managers who need the work done without a long back-and-forth.
Calling for a quote is the first step, and it is a short one. When you call (830) 590-5192, you get a price before anything is scheduled. The rate covers what the job involves, and you get a clear answer about what it includes. There is no obligation to book before you have the information you need.
We are open every day from 8:00 AM to 9:00 PM. That covers most of the situations that come up during a normal week, including calls that cannot wait until the next business day. You always know who to call if you need us again. Call this morning. Get a straight answer today. That is how we work.
We serve Converse and the communities around it across Bexar County and into the adjacent areas. That includes Schertz, Universal City, Selma, Live Oak, Kirby, Windcrest, and San Antonio. If you are in the broader Bexar County area and need a plumber, call and we will confirm coverage at your address.
Low water pressure across multiple fixtures usually points to a problem with the main supply line, a failing pressure regulator, or significant mineral buildup inside older pipes. In Converse and the surrounding Bexar County area, hard water is a common contributor because scale accumulates inside supply lines and reduces flow over time. We run water pressure diagnostics to locate the cause and repair it at the source rather than guessing.
Lukewarm or inconsistent hot water, a rumbling or popping sound from the tank, visible rust or corrosion on the unit, water pooling at the base, or a water heater that is significantly past its expected service life are all signs worth acting on. We inspect the unit, explain what is wrong, and confirm the rate for a repair or replacement before any work is scheduled. Same-day service is available for water heater calls when the schedule allows.
A tank water heater stores a set volume of hot water and reheats it as it is used. A tankless unit heats water on demand and does not maintain a stored supply, which reduces standby energy loss and takes up less space. The right choice depends on the household's hot water demand, the available space, and the existing gas or water line setup. We walk through the options on the call so you can make an informed decision before anything is scheduled.
Older homes in this area may still have galvanized steel supply lines that have corroded from the inside out, narrowing the pipe and reducing pressure while also creating weak points that fail over time. Hard water accelerates that process by depositing mineral scale inside the pipe. When recurring leaks or persistent low pressure point to the pipe material itself, whole-home repiping with copper or PEX is often the more cost-effective path compared to repeated individual repairs.
Repiping replaces the existing supply lines throughout the house with new copper or PEX pipe. It makes sense when a home has aging galvanized or polybutylene lines that are corroding, when pressure problems are widespread rather than isolated, or when leaks keep recurring in different locations. The process involves opening walls and ceilings to access the lines, replacing them in sections, and testing the system before the work is closed up. We walk through the scope and cost before any work begins.
A standard drain cleaning uses a snake or auger to break up or pull out a blockage in the line. Hydro jetting uses high-pressure water to cut through grease, mineral scale, and debris that a snake cannot fully clear, and it flushes the line clean rather than just opening a path through the clog. We use hydro jetting for stubborn or recurring blockages and for main line cleaning where buildup has accumulated over time.
Hidden leaks are found using diagnostic methods that identify where water is escaping before any cutting or excavation begins. For slab leaks, which are common in Converse given the prevalence of slab foundations, we locate the source accurately so the repair is targeted rather than exploratory. Getting the detection right is as important as the repair itself, because opening the wrong section of slab or wall adds cost without solving the problem.
A sump pump installation covers selecting a unit sized for the space and drainage load, positioning it correctly in the lowest point of the area being protected, and running a discharge line that moves water away from the foundation. In Converse and surrounding parts of Bexar County, clay soil does not drain quickly, and low-lying areas can see water intrusion during heavy storm events. If your crawl space or lower level collects water after rain, a sump pump is worth discussing.
Root systems follow moisture, and aging clay or cast-iron sewer lines have joints and cracks that give roots an easy entry point. Once inside, roots grow and eventually block the line or cause structural damage to the pipe wall. We clear root intrusion using hydro jetting, inspect the affected section to assess the damage, and repair or replace the line where roots have caused a failure rather than just clearing the blockage and leaving the underlying problem in place.
The San Antonio metro and surrounding communities, including Converse, draw from a water supply with high mineral content. A water softener is connected to the main supply line so that treated water reaches every fixture and appliance in the house. Installation covers the unit itself, the connection to the supply line, and a walkthrough of how the system operates. Reducing the mineral load protects water heaters, fixture aerators, and supply lines from the scale buildup that shortens their useful life.
A disposal that hums but does not spin, trips its reset button repeatedly, leaks from the bottom, or makes grinding noises when nothing is in it is showing signs of failure. A jam is often fixable on the spot. A disposal that is leaking internally or has a burned-out motor is typically more cost-effective to replace than repair. We assess the unit when we arrive and confirm the rate for whichever path makes sense before any work begins.
Shutoff valves that are corroded, difficult to turn, or that do not fully stop the water flow when closed are a liability in any plumbing emergency. Older supply lines, particularly braided lines under sinks or the main shutoff valve at the meter, should be replaced when they show signs of wear or when they have not been exercised in years. Updating these components is straightforward work that protects the rest of the system when something goes wrong elsewhere in the house.
When a repair or replacement job uncovers plumbing that does not meet current code, we explain what the issue is and what it would take to bring it into compliance before any additional work is scheduled. The decision about how to proceed is yours, with a clear explanation of what is involved and what it costs. Work performed by licensed plumbers follows current code requirements for the Converse and Bexar County area.
Outdoor faucets and hose bibs are part of the supply line system and are subject to the same wear and mineral buildup as interior fixtures. A leaking outdoor faucet, a hose bib that will not shut off fully, or a supply line running to an exterior connection are all jobs we handle. We also address shutoff valves for outdoor lines, which matter when a fixture needs to be isolated for repair without cutting water to the whole house.
Repairs, installations, emergency calls, and remodel plumbing are handled for homes and commercial properties throughout Converse and Bexar County. The work is performed by licensed plumbers, and we are available every day from 8:00 AM to 9:00 PM. Call (830) 590-5192 to schedule or get a quote. One call brings a plumber to your door.
Whether you need a drain cleared, a water heater replaced, or a sump pump installed before the next storm rolls through, we handle the full range of residential and commercial plumbing work in Converse and across Bexar County. The table below lays out what each service covers, who it fits best, and one practical detail worth knowing before you call. Every job starts with a confirmed rate and a clear scope, so you know what is involved before any work is scheduled.
| Type of Job | What's Included | Recommended For | Things to Keep in Mind |
|---|---|---|---|
| Well Pump Service |
| Properties on private well water with pressure loss or pump failure | A well that delivers low pressure or runs dry intermittently may have a failing pump or pressure tank |
| Sump Pump Installation |
| Low-lying properties in Converse that collect water during heavy rain events | Clay soil in this area slows drainage and increases the risk of water pushing against foundations |
| Water Heater Repair & ReplacementMost Popular |
| Households with no hot water, lukewarm output, or a leaking or aging unit | Work is performed by licensed plumbers and follows current code requirements for the area |
| Water Softener Installation |
| Homes dealing with scale buildup on fixtures, appliances, and inside water heaters | The Converse area draws from a high-mineral water supply that shortens the life of pipes and equipment |
| Toilet Repair & Installation |
| Homeowners dealing with a toilet that runs, leaks at the base, or will not flush properly | A running toilet can waste a significant volume of water before it is noticed on a bill |
| Sewer & Main Line Service |
| Properties with multiple slow drains, sewage odors, or backups at floor drains | Multiple fixtures backing up at once usually points to the main line rather than a single fixture clog |
| Faucet & Fixture Installation |
| Remodels, fixture upgrades, and dripping or damaged faucets in any room | Mineral scale from hard water in this area accelerates wear on aerators and valve seats |
| Water Pressure & Shutoff Valve Repair |
| Homes with low or inconsistent pressure, or valves that no longer fully close | A shutoff valve that will not close is a liability in any plumbing emergency |
| Drain Cleaning & Clog Removal |
| Homeowners and property managers with slow or backed-up drains | Recurring clogs in the same fixture often point to a deeper line problem worth diagnosing |
| Leak Detection & Repair |
| Anyone noticing unexplained water damage, high water bills, or damp spots | Accurate detection before any cutting or excavation keeps the repair targeted and the cost down |
| Whole-Home Repiping |
| Older homes with recurring leaks, persistent low pressure, or aging pipe materials | Repiping is often more cost-effective than repeated individual repairs when the pipe material is the root cause |
| Tree-Root Sewer Line Service |
| Older neighborhoods with mature trees and aging clay or cast-iron sewer lines | Clearing the roots without addressing the damaged section leaves the problem ready to return |
| Garbage Disposal Service |
| Homeowners with a disposal that hums, leaks, or trips its reset button repeatedly | A disposal leaking from the bottom almost always needs replacement rather than repair |
| Emergency Plumbing |
| Any situation where waiting until the next business day is not an option | We are open every day from 8:00 AM to 9:00 PM and same-day service is often available |
| Slab Leak Detection & Repair |
| Slab-foundation homes with unexplained wet floors, high water bills, or warm spots underfoot | Slab foundations are common throughout Bexar County, and accurate detection before cutting saves significant cost |
How do I know whether a clog is in a single fixture or in the main line?
A single slow or blocked drain is usually a localized clog in that fixture's trap or branch line. When two or more fixtures back up at the same time, or when flushing a toilet causes water to come up in a nearby tub or floor drain, the main sewer line is almost always involved. We diagnose the location before recommending a clearing method, because the right approach for a fixture clog and the right approach for a main line blockage are not the same job.
What does hydro jetting clear that a standard snake cannot?
A drain snake breaks up or pulls out a blockage, but it does not clean the pipe wall. Grease, mineral scale, and fine debris can coat the inside of a line and narrow it over time, which is why some drains clog repeatedly even after snaking. Hydro jetting uses high-pressure water to cut through that buildup and flush the line clean from wall to wall. We use it for stubborn recurring clogs and for main line cleaning where accumulation has reduced flow significantly.
How long does a water heater replacement typically take?
A standard tank water heater replacement is usually completed in a few hours. The work covers removing the old unit, confirming the connections and venting meet current requirements, setting the new unit, and testing it before we leave. A tankless installation takes longer because the connection work is more involved, particularly if the gas line or water supply needs adjustment to match the new unit's demand. We confirm the expected time on the call so you can plan your day accordingly.
Work Performed by Licensed Plumbers
Every job is handled by licensed plumbers who diagnose the issue, confirm the rate, and complete the work to current code requirements. You get a straight answer about what is wrong before anything is scheduled.
Do I need to be home when the plumber arrives?
For interior work, yes, someone who can grant access and answer questions about the plumbing needs to be present. For exterior work such as an outdoor faucet or a cleanout access point, that depends on the specific job. When you call to schedule, we go over what access is needed so there are no complications on the day of the visit.
When does a dripping faucet or fixture become a problem worth calling about?
A dripping faucet wastes more water than most people expect, and a fixture that drips continuously can add a noticeable amount to a water bill over a billing cycle. Beyond the water loss, a drip that goes unaddressed can wear out the valve seat or cartridge to the point where a simple washer replacement becomes a full fixture replacement. Calling sooner keeps the repair straightforward and the cost lower.
How is a slab leak located without tearing up the whole floor?
We use diagnostic methods to pinpoint where water is escaping before any concrete is cut. Getting the location right matters because opening the wrong section of slab adds cost and time without fixing the problem. Once the source is confirmed, we access only the affected area, repair or reroute the pipe as the situation warrants, and test the system before the work is closed up.
Same-Day and Emergency Availability
We are open every day from 8:00 AM to 9:00 PM, and same-day service is often available for urgent calls. A burst pipe or a water heater that stops working does not wait for a business day, and neither do we.
Is the plumbing work permitted and inspected to code?
Work performed by licensed plumbers follows current code requirements for the Converse and Bexar County area. Whether a permit is required depends on the scope of the job and the local jurisdiction. When a permit is needed, we handle that as part of the job. If a repair or replacement uncovers plumbing that does not meet current code, we explain what is involved and what it would take to bring it into compliance before any additional work is scheduled.
What causes a sump pump to fail, and how do I know mine is not working?
Sump pumps fail for a few common reasons: a burned-out motor, a stuck or broken float switch, a clogged inlet screen, or a discharge line that has become blocked or frozen. Signs that a pump has failed include water collecting in the area it is supposed to protect, a pump that runs continuously without moving water, or a pump that does not run at all when water is present. We inspect the pump, the float, and the discharge line to find the cause and confirm whether a repair or replacement is the right path.
Scope Agreed Before Any Pipe Is Cut
The price and the scope of work are confirmed before anything is opened up or replaced. You know what the job covers and what it costs before we start, with no pressure to proceed until you are ready.
When is a DIY fix appropriate, and when should I call a plumber?
Plunging a toilet or clearing a simple sink clog with a drain tool are reasonable first steps for a homeowner. Anything involving supply line connections, shutoff valves, water heater components, or work inside a wall or under a slab is a different situation. An incorrect connection or a missed shutoff can turn a small repair into water damage. If the fix involves cutting into a line, opening a wall, or working on a water heater, calling a plumber is the lower-risk path.
How long does a whole-home repipe take to complete?
The timeline depends on the size of the house and how accessible the existing lines are. A typical single-family home repipe takes anywhere from one to several days. The process involves opening walls and ceilings to reach the supply lines, replacing them section by section, and pressure-testing the system before anything is closed up. We walk through the expected scope and timeline before any work begins so you know what to plan for.
What should I do if I suspect a main water shutoff valve is not working correctly?
A shutoff valve that is corroded, hard to turn, or that does not fully stop the water flow when closed is a problem worth addressing before an emergency forces the issue. If you cannot confirm that your main shutoff closes all the way, call us and we will assess the valve and replace it if needed. Knowing your shutoff works is one of the most practical things a homeowner can have confirmed, because it is the first thing you reach for when a pipe lets go.
Call (830) 590-5192 to get a quote, confirm availability, or ask about any of the services listed here. We are open every day from 8:00 AM to 9:00 PM and ready to help.
(830) 590-5192