How To Save Money When It Comes To Your Plumbing!
- Always Turn Down Water Heater – Whenever you are gone for a couple days or an extended period of time turn your water heater down a few degrees.
- Water Your Lawn at Proper Times – You always want to water any vegetation on your property when the sun light still isn’t out, that way your plants can absorb as much of the water they can.
- Always Check for Leaks – One of the worst plumbing problems you can have at your property is a unknown leak. They can cause thousands in damage and many health problems, so be proactive in checking for them!
- Never Put Certain Foods Down the Drain– This includes no Grease and Fats, Fibrous vegetables, Oils, Potatoes, Bones, and paper and plastic!
- Every Couple of Years Have Pipes Checked – Having your pipes or water heater checked by a professional like Immediate Response Plumbing is always better than having a catastrophic problem happen! Call us today and let us make sure your home or business is properly protected from all present and future plumbing problems!
Don’t hesitate to contact Immediate Response Plumbing today If you or someone you know is dealing with plumbing problems in the greater San Antonio area. Let one of our dedicated team members come out to your residence or business and handle all your problems for you! At Immediate Response Plumbing we are dedicated to serving you with the highest quality service . Contact us at IRP today and stop worrying about those plumbing problems now!
Do you sometimes neglect your laundry plumbing?
Keep on top of the maintenance of your laundry plumbing and you’ll save yourself frustration, money and time. It takes just a handful of simple procedures to ensure your pipes, tanks and fittings are in good working order. The following are tips to keep your laundry room plumbing in tip-top shape.
Make a List, Check It Twice
Your washing machine is one of the most important appliances in your home. There’s more plumbing than meets the eye on most machines. Making sure the hoses are securely connected to the water main is the most obvious task in preventative maintenance. Here are a few more things to check regularly to ensure your machine is ready to take on your family’s dirty laundry.
- Inspect your washing machine for signs of wear, including loose joints and leaks.
- Check exposed pipes under the drain sink for signs of leaks.
- Pour a bucket of water down the drain to keep the trap seal full.
- Check the temperature setting of your water heater to make sure it’s not over 120 degrees Fahrenheit.
- Check for puddles on the floor. Try to find the source of the water. You could have a leaking water heater, or there could be a problem with your washing machine.
Give Your Laundry Room an Environmentally Friendly Makeover
Energy conservation is good for your budget and helps the environment. With more efficient appliances and practices, you’ll cut down on energy use and lower your power and water bills. These are a few of the simple steps you can take to reduce waste in your laundry room.
- Replace rubber hoses with stainless steel braided hoses that last longer and are resistant to leaking and cracking.
- Install strainers on your washing machine hoses and drains to keep hair and debris from entering or clogging your drain lines. Physical barriers are effective and don’t require harsh chemicals.
- Follow the manufacturer’s recommendations when choosing laundry detergent for the washing machine. High-efficiency machines often use a concentrated formula that can cut down on how often you need to buy soap.
- Consider replacing your washing machine with an up-to-date, front-load model. Choose a high-efficiency model for the most savings.
- Consider replacing your dryer, too. Dryers use a lot of energy so it’s important to have a an energy-efficienct model.
Be conscientious about maintenance and you’ll reduce the risk of problems down the road. With well-maintained plumbing and appliances, you can focus on getting your laundry clean instead of worrying about the pipes.
Immediate Response Plumbing can help you with any of your plumbing needs.
The local municipal water system does an excellent job of rendering water potable for our use. Modern life depends on reliable water for drinking, cooking and cleaning. But even the most diligent public system can miss certain key factors – hard water, for example, is a considerable problem in our area – and everyone’s water could stand to be a little cleaner and purer. Homes with infants or similarly sensitive family members especially benefit from a water filtration system.
A water filtration system installed by a trained plumbing service professional, can provide you with years of cleaner healthier water. With temperatures finally lowering after a very hot summer, now is a good time to schedule a home improvement project such as this.
Problems Addressed by Water Filtration
We like to perform a little demonstration to emphasize the kinds of improvements that a water filtration system can bring. Fill an ice cube tray with water from the tap, then fill another with filtered water purchased from a store. After they have frozen, take a look at them. The ice created by the tap water is apt to look grayer and cloudier than the ice from the store.
That can be created by all manner of contaminants which, even when they’re not harmful, can create all kinds of little impacts on your quality of life. Installing a water filtration system is the best way to correct that.
How Installation Works
Before installation begins, you might want to have your water tested to pinpoint any specific issues that it may be experiencing. If you only have hard water, for instance, then a water softening system may be ideal, while homes about to welcome newborns may want a UV water purifier to eliminate germs and contaminants. Once you know what you want, then installation can proceed. In most cases, the water filtration system is installed either at the apex of the outlet it is intended to affect, or at the apex to your main water line, where all the water from the municipal system enters your home.
Most water filtration systems cost very little to operate and require few repairs save for periodic maintenance. That gives you very good value for the installation costs, allowing you to enjoy the benefits for years. What are those benefits? They can include, but are not limited to, the following:
- Healthier water By removing those impurities, you and your family can enjoy drinking and bathing with no risk of germs or bacteria slipping though.
- Tastier water Filtered water tends to taste better than unfiltered water, a trend that extends to foods cooked with filtered water as well.
- Softer water If hard water is a problem in your home, water softeners will remove the minerals. That crusty white build-up will vanish and your laundry loads will go much easier on your clothes.
If you’d like a water filtration system installed in your San Antonio, TX home, or you have an existing system that needs a look, call the professionals at Immediate Response Plumbing, Inc!
WATER RE-CIRCULATION SYSTEM?
Do you find yourself having to run the water in the shower for several minutes before you get in the shower. If you answered yes, you need a Hot Water Circulating Pump for your home. This system can deliver hot water to fixtures quickly without waiting for the water to get hot. Rather than relying on low water pressure, common in most water lines, recirculating systems use a pump to rapidly move water from a water heater to the fixtures. Not only do you not have to wait, you save money by not running water down the drain. Once you have a hot water recirculating pump installed, you will never want to go without one again.
CALL FOR A SERVICE APPOINTMENT (210) 899-7779
THIS IS HOW IT WORKS – HOT WATER CIRCULATING PUMP
The old systems used to have a separate line that was connected to the furthest fixture in the home and ran back to the water heater to reheat the water and deliver it back to each fixture. The new systems circulates water back to the hot water heater by pushing the water into the cold system until the hot water arrives at the fixture you install the sensor on. The pump uses the main supply line, which eliminates the need to install a separate return line like the old style. A small circulation pump is installed on the outlet pipe of the hot water heater tank. The sensor valve at your fixture provides the by-pass that allows the water to recirculate using the already installed cold water pipe line as a return line to the hot water. When the water temperature reaches 100.4 degrees F the valve will close to stop the circulation. Together the pump and valve provide instant hot water for every fixture and shower valve in the home. And there is even a timer on the pump so you can run it when you need hot water most like in the morning or at night when most people take showers and not during the day when your at work.
GIVE US A CALL TODAY SO WE CAN HELP YOU
Immediate Response Plumbing (210) 899-7779
Summer Plumbing Tips
The heat is on! Summer’s rising temperatures often coincide with an increase of water usage, both indoors and outdoors. It’s estimated that a family’s water usage can increase by 25%-50% during the warmest months of the year. We are always looking for ways to save some money, so these helpful tips will give your plumbing and water bill a little break:
Are you a homeowner that’s frustrated because your water isn’t getting hot? I know I can’t stand it if I don’t have hot water or if it barely stays warm. When you turn on the tap water, you want the water to get hot quickly, and if it’s not, something may have malfunctioned and could need repair. Here are some possible causes to why your water is not getting hot.
If you have a gas-powered water heater, the burner unit below the tank has gas jets that will light and transfer heat to the water in the tank. If the burner is dirty or begins to corrode, it will have a hard time igniting.
Broken Heating Element
If you have an electric water heater, the heating elements inside the tank can break and lead to a loss of hot water. Sometimes, your water will slowly start to cool down and this could be because the element has burned out. If the second element fails, you’ll be left with only cold water. If the heating element is not burned out, it may just have flipped off because of a tripped circuit or a blown fuse, so check the fuse box as well.
Faulty Gas Control Valve
If the gas control valve isn’t working properly, it will cut off the gas supply to the burner won’t be able to get to the water to warm up.Eventually, the gas jets will not be able to turn on and the water in the tank will not heat.
The pilot light will ignite your water heater’s burner and if it goes out, there is nothing to heat the water. You can see if the pilot light is out by removing the cover of the water heater and inspecting the light. Your water heater will usually have directions on how to relight it. Once it’s on, you’ll need to wait about 30 minutes to let the burners heat up the water. If you have done this a few times and the light keeps going out, you should contact a plumbing professional to get it looked at.
If your water is still warm, but not as hot as it normally is, this could also indicate a problem with your tank. Lukewarm water should not be ignored, especially if it continues this way for a long period of time. Contact our team of plumbing professionals at Immediate Response Plumbing if the water in your home is not heating up properly.